Trying to setup a VPN server and connect to it, but not having much luck. Pretty sure it's because I have one of the network settings wrong, especially since I tried a 3rd party VPN client and it told me "wrong remote address". I have replaced actual external IP addresses for my own safety.
On the remote router that is the VPN server:
Internal IP address: 192.168.0.1
External IP address: [modem]
(on the VPN settings page):
"Address Remote Network": 192.168.9.0/24
"Address Local Network": 192.168.0.0./24
Local 1:1 NAT is unchecked
Office's setup:
Our router address: 192.168.0.1
External IP address: [office]
My computer's IP address: 192.168.0.15
VPN client setup:
VPN client address: 192.168.0.240
Address type: subnet address
Remote LAN address: 192.168.9.0
Subnet mask: 255.255.255.0
When I try to connect, it passes Phase 1 auth, but hangs at Phase 2. Here is the troublesome line from the router log:
Oct 11 11:30:12 pluto[1405]: "vpn1"[2] [office]:4500 #1: cannot respond to IPsec SA request because no connection is known for 192.168.9.0/24===[modem]:4500...[office]:4500[192.168.0.15]===192.168.0.240/32
Like I said, the VPN client says: "Wrong Remote Address". I've tried changing the Remote LAN address to just about everything.
Seriously, just beyond confused right now. And ........ed. Any help would be appreciated.
