assembly for M8 microprocessor series

[GanglyLamb]

Don't ask me why but I'm currently having a project for school , we need to use the CY7C63001 microcontroller which is a low speed usb controller from cypress.

Problem is the thing is so old , i cant find too much info on this controller.. So far i've managed to get my hands on an assembler for this controller, problem is since I have only programmed for the 68K I don't know where to start...

I've already got my hands on a brief explanation on the assembly language that is used to program this controller.

What I'm looking for now is some sort of Visual Simulator like I have for the 68K. Currently I only have the assembler which is a console program.

If I would have a visual simulator it would really help me alot to bring this project to a good end.

So anyone around that has experience with programming for these series or that has some more info, feel free to respond , I'd really appreciate it.

Thanks in advance,

Ganglylamb.

PS: If there are any other low-cost low speed usb controllers , and you have experience with these please share your knowledge. I've already been looking in the enCore series - also from cypress , they are more advanced and replace alot of otherwise needed external components that are now directly integrated in the chip. The reason why I don't really want to use this controller is because of the cost, the controller itself is cheap, but the developer kit which is pretty necessary is too expensive for this project ( which is funded by our school since we'll be making some kind of educational purpose board they want to use next year )

[Dave_Sinkula]

Here's a site to visit:
http://lvr.com/usb.htm

[edit]I used to work with the guy who made the USBSIMM. [edit=2]Found Rob's site.[/edit]. I remember him mentioning John Hyde's stuff as well (you may want to contact him).

We used Keil's compiler. He had used the simulator and emulator and such. For debugging I generally used a 'scope with a couple of free outputs because of issues with enumeration/renumeration.[/edit]

[GanglyLamb]

We used Keil's compiler. He had used the simulator and emulator and such. For debugging I generally used a 'scope with a couple of free outputs because of issues with enumeration/renumeration.[/edit]

Yep, been looking at that as well .

I check the other sites this evening after school, and like you say for debugging I will just have to spend some time in the labs from the school - I dont have some scope just lying around .


Thanks Dave .

[GanglyLamb]

I know im bringing up an old topic but I just wanted to share my knowledge here , which I've gathered along the road.

http://www.elektuur.nl/Default.aspx?...%20thermometer

This link contains an article (although its in dutch - it contains a schematic of how to connect the controller etc.) but the most important part is the zip located at
http://www.elektuur.nl/Portals/0/Mag.../000079-11.zip

It contains the asm file , the drivers (win xp, win95 en win 98 ) and a vb program to control the controller (CY7C63001). You can still fiddle around with the firmware and make modifications to whatever you need. Just be aware that this controller is OTP and as far as I know there's no controller that has the same architecture etc and that uses EEPROM or anything else erasable , so make sure you know what you'r doing with the firmware or you'll end up with a uselesss controller.

And if you really don't want to mess with the firmware (to free more output pins ) then you can always use a shift register controlled by 2 ports from the controller ( one clock , one data ). Although it will be slower you will still gain control of more "output ports".

That's all ( of course I learned more about this whole thing but these are the most important things and should get you on your way rather fast ).

-Ganglylamb.