Thread: dual boot Win XP, win 2000

  1. #1
    Registered User Micko's Avatar
    Join Date
    Nov 2003
    Posts
    715

    dual boot Win XP, win 2000

    OK, I have installed windows XP on my computer. Now I added new fresh formatted hard disk and want to install win 2000 on it to have dual boot. Canm you describe me procedure wat to do to have minimum problems during installation? How to start?
    Thanks
    Gotta love the "please fix this for me, but I'm not going to tell you which functions we're allowed to use" posts.
    It's like teaching people to walk by first breaking their legs - muppet teachers! - Salem

  2. #2
    Software Developer jverkoey's Avatar
    Join Date
    Feb 2003
    Location
    New York
    Posts
    1,905
    http://www.windowsitpro.com/Article/...580/24580.html

    I believe you can install the OS on the other hard drive, and then use msconfig to modify your boot options to give you a menu of which OS to load.

  3. #3
    Registered User xxxrugby's Avatar
    Join Date
    Jan 2005
    Posts
    178
    Install one of your Windows on primaray partition.
    And then install second Windows on oether partition.

    Never mind if oether HDD is jumped as slave.
    Only first Win must be on Primary or Master.

    And then you will see them both after BIOS to choose what you wanna start.

    If you dont see. Lets say you got Win2k on C:/ and he doesent see WinXP on d:/ simply go in your Win2k "boot.ini" file and configure your boot start.

    About Win Boot.ini
    Code:
    Windows NT, 2000 and XP use a configuration file called BOOT.INI to control how the operating system is booted and any startup options. By modifying the startup switches you can manage the boot process including booting Windows in Safe mode, creating a log file, or disabling the splash screen. 
    
    Open you the root partition of your hard drive (normally C:\) and find the file called "BOOT.INI". You may need to enable hidden files under Folder > Options. 
    
    Right-click on the file, select Properties and uncheck "Read-only" then click OK. You may like to make a backup of the file at this point to allow you to restore if you experience problems. 
    
    Open the file in Notepad and under the [operating systems] section you will find a list of all the installed operating systems. For example: 
    
    multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Home Edition" /fastdetect
    
    To enable or disable startup options simply change or add any of the switches listed below to the default command-line. For example you could add "/SOS" to the command-line above to display the splash screen and view the drivers being loaded. 
    
    /3GB - New to Service Pack 3. This causes the split between user and system portions of the Windows NT map to become 3GB for user applications, 1GB for System. To take advantage of this the system must be part of the NT Enterprise suite and the application must be flagged as a 3GB aware application. 
    
    /BASEVIDEO - The computer starts up using the standard VGA video driver. Use this if you have installed a graphics driver that is not working. 
    
    /BAUDRATE - Specifies the baud rate to be used for debugging. If you do not set the baud rate, the default baud rate is 9600 if a modem is attached, and 19200 for a null-modem cable. 
    
    /BOOTLOG - Makes 2000 write a log of the boot to the file %SystemRoot%\NTBTLOG.TXT Windows 2000/XP Only. 
    
    /BURNMEMORY=x - Makes NT forget about the given amount of memory in MB. If /burnmemory=64 was given then 64MB of memory would be unavailable. 
    
    /CRASHDEBUG - The debugger is loaded when you start Windows NT, but remains inactive unless a Kernel error occurs. This mode is useful if you are experiencing random, unpredictable Kernel errors. 
    
    /DEBUG - The debugger is loaded when you start Windows NT, and can be activated at any time by a host debugger connected to the computer. This is the mode to use when you are debugging problems that are regularly reproducible. 
    
    /DEBUGPORT=comx - Specifies the com port to use for debugging, where x is the communications port that you want to use. 
    
    /FASTDETECT - Specifying FASTDETECT causes NTDETECT to skip parallel and serial device enumeration for a boot into Win2K, whereas omitting the switch has NTDETECT perform enumeration for a boot into NT 4.0. Win2K setup automatically recognizes dual-boot configurations and sets this switch for BOOT.INI lines that specify a Win2K boot. Windows 2000/XP Only. 
    
    /HAL=<hal> - Allows you to override the HAL used, for example using a checked version. 
    
    /INTAFFINITY - Sets the multiprocessor HAL (HALMPS.DLL) to set interrupt affinities such that only the highest numbered processor in an SMP will receive interrupts. Without the switch the HAL defaults to its normal behavior of letting all processors receive interrupts. Windows 2000/XP Only. 
    
    /KERNEL=<kernel> - Same as above but for the kernel. 
    
    /MAXMEM:n - Specifies the maximum amount of RAM that Windows NT can use. This switch is useful if you suspect a memory chip is bad. 
    
    /NODEBUG - No debugging information is being used. 
    
    /NOGUIBOOT - When this option is specified the VGA video driver responsible for presenting bit mapped graphics during Win2K's boot process is not initialized. The driver is used to display boot progress information, as well as to print the Blue Screen crash screen, so disabling it will disable Win2K's ability to do those things as well. Windows 2000/XP only. 
    
    /NOSERIALMICE=[COMx | COMx,y,z...] - Disables serial mouse detection of the specified COM port(s). Use this switch if you have a component other than a mouse attached to a serial port during the startup sequence. If you use /NOSERIALMICE without specifying a COM port, serial mouse detection is disabled on all COM ports. 
    
    /NUMPROC=n - Only enables the first n processors on a multiple processor system. 
    
    /ONECPU - Only use the first CPU in a multiple processor system. 
    
    /PCILOCK - Stops Windows NT from dynamically assigning IO/IRQ resources to PCI devices and leaves the devices configured by the BIOS. 
    
    /SAFEBOOT - This is an automatic switch which NTLDR should complete for you when you use the F8 menu to perform a safe boot. Following the colon in the option you must specify one of three additional switches: MINIMAL, NETWORK, or DSREPAIR. The MINIMAL and NETWORK flags correspond to safe boot with no network and safe boot with network support. The safe boot is a boot where Windows 2000/XP only loads drivers and services that are specified by name or group in the Minimal or Network Registry keys under HKLM\System\CurrentControlSet\Control\SafeBoot. The DSREPAIR (Directory Services Repair) switch causes NT to boot into a mode where it restores the Active Directory from a backup medium you present. An additional option that you can append is "(ALTERNATESHELL)". This tells NT to use the program specified by HKLM\System\CurrentControlSet\SafeBoot\AlternateShell as the graphical shell, rather than to use the default which is Explorer. Windows 2000/XP only. 
    
    /SOS - Displays the driver names while they are being loaded. Use this switch if Windows NT won’t start up and you think a driver is missing. This option is configured by default on the [VGA] option on the boot menu. 
    
    /WIN95 - This switch is only pertinent on a triple-boot system that has DOS, Win9x and Windows NT installed. Specifying the /WIN95 switch directs NTLDR to boot the Win9x boot sector stored in BOOTSECT.W40. See Microsoft KB Article Q157992 for more information. 
    
    /WIN95DOS - This switch is only pertinent on a triple-boot system that has DOS, Win9x and Windows NT installed. Specifying the /WIN95DOS switch directs NTLDR to boot the DOS boot sector stored in BOOTSECT.DOS. See Microsoft KB Article Q157992 for more information. 
    
    /YEAR= - Specifying this value causes NT/Windows 2000 core time function to ignore the year that the computer's real-time clock reports and instead use the one indicated. Thus, the year used in the switch affects every piece of software on the system, including the NT kernel. Example: /YEAR=2005. Note: this option is only available on NT 4.0 Service Pack 4 and Windows 2000/XP. 
    Save the file and restart Windows for the change to take effect.
    
    This looks like boot.ini for XP on C, and 98 on D partition:
    
    
    Code:
    --------------------------------------------------------------------
    [Boot Loader]
    timeout=30
    Default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
    [operating systems]
    multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /fastdetect
    C:\="Microsoft Windows 98"
    --------------------------------------------------------------------
    This look like boot.ini for XP on c: partiotion:
    ------------------------------------------------------------------- [boot loader] timeout=30 default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS [operating systems] multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /fastdetect -------------------------------------------------------------------
    Sorry for spelling errors, not English!
    xxxrugby: "All Human Race Will Die From My Hand!"
    xxxrugby: "We are all philosophers, when question is about politics!"

  4. #4
    Registered User Micko's Avatar
    Join Date
    Nov 2003
    Posts
    715
    Thanks for the help, guys.
    Gotta love the "please fix this for me, but I'm not going to tell you which functions we're allowed to use" posts.
    It's like teaching people to walk by first breaking their legs - muppet teachers! - Salem

  5. #5
    Bios Raider biosninja's Avatar
    Join Date
    Jul 2002
    Location
    South Africa
    Posts
    765
    I run WinXP and Win2000 in dual boot.

    All I did is install Win2000 first on my second hard drive and then WinXP on my first drive. Worked like a charm for me.
    The knack of flying is learning to throw yourself at the ground and miss.

  6. #6
    PC Fixer-Upper Waldo2k2's Avatar
    Join Date
    May 2002
    Posts
    2,001
    yeah for future reference install the os that controls booting last. Ex: 98 then 2000 then xp then linux.
    PHP and XML
    Let's talk about SAX

  7. #7
    Registered User Micko's Avatar
    Join Date
    Nov 2003
    Posts
    715
    Thanks, I followed instruction and with a little help of fixboot nad recovery everything works fine.
    Gotta love the "please fix this for me, but I'm not going to tell you which functions we're allowed to use" posts.
    It's like teaching people to walk by first breaking their legs - muppet teachers! - Salem

Popular pages Recent additions subscribe to a feed

Similar Threads

  1. Replies: 8
    Last Post: 05-07-2009, 11:31 AM
  2. help with this
    By tyrantil in forum C Programming
    Replies: 18
    Last Post: 01-30-2005, 04:53 PM
  3. Question..
    By pode in forum Windows Programming
    Replies: 12
    Last Post: 12-19-2004, 07:05 PM
  4. freebsd and redhat dual boot.
    By xddxogm3 in forum Linux Programming
    Replies: 1
    Last Post: 05-09-2004, 06:06 PM
  5. Dual Booting Win XP & Win 98
    By netboy in forum Tech Board
    Replies: 2
    Last Post: 08-18-2003, 02:29 AM