So I wrote this code a while back and now I want to change it to accept units as their symbol rather than their exponent.
Say when it asks me for the number, I want it to accept it when I type in something such as "5 Hz" for Hertz instead of "5 mag" and then "0" for everything else and "-1" for time.
Code:#include <stdio.h>
#include <math.h>
//create structure
struct u_val
{
float mag;
float mass;
float length;
float lum;
float time;
float current;
float temp;
float quan;
int NaN;
};
//get the values for the structures
struct u_val Get_u (void)
{
struct u_val number;
printf("Please enter a number (magnitude): ");
scanf_s("%f", &number.mag);
printf("Please enter the mass (kg) exponent: ");
scanf_s("%f", &number.mass);
printf("Please enter the length (m) exponent: ");
scanf_s("%f", &number.length);
printf("Please enter the luminous intensity (cd) exponent: ");
scanf_s("%f", &number.lum);
printf("Please enter the time (s) exponent: ");
scanf_s("%f", &number.time);
printf("Please enter the current (A) exponent: ");
scanf_s("%f", &number.current);
printf("Please enter the temperature (K) exponent: ");
scanf_s("%f", &number.temp);
printf("Please enter the amount of substance (mol) exponent: ");
scanf_s("%f", &number.quan);
printf("\n");
return number;
}
//check to see if the units are the same for addition and subtraction using if statements within if statements to continue going through with the actions if one of the if statements are not satisfied it NaN will remain 1
int Check_units (struct u_val x1, struct u_val x2)
{
int NaN=1;
if(x1.mass == x2.mass)
if(x1.length == x2.length)
if(x1.lum == x2.lum)
if(x1.time == x2.time)
if(x1.current == x2.current)
if(x1.temp == x2.temp)
if(x1.quan == x2.quan)
NaN = 0;//if all of the if statements are satisfied NaN will be set to 0
return NaN;
}
//check for electrical units
int electrical_units (struct u_val x1)
{
int NaN = 1;
const struct u_val
volt = {0, 1, 2, 0, -3, -1, 0, 0, 0},
ohm = {0, 1, 2, 0, -3, -2, 0, 0, 0},
watt = {0, 1, 2, 0, -3, 0, 0, 0, 0},
joule = {0, 1, 2, 0, -2, 0, 0, 0, 0},
farad = {0, -1, -2, 0, 4, 2, 0, 0, 0},
henry = {0, 1, 2, 0, -2, -2, 0, 0, 0},
hertz = {0, 0, 0, 0, -1, 0, 0, 0, 0},
coul = {0, 0, 0, 0, 1, 1, 0, 0, 0},
siem = {0, -1, -2, 0, 3, 2, 0, 0, 0},
newton = {0, 1, 1, 0, -2, 0, 0, 0, 0};
{//check volts
if(x1.mass == volt.mass && x1.length == volt.length && x1.lum == volt.lum && x1.time == volt.time && x1.current == volt.current && x1.temp == volt.temp && x1.quan == volt.quan)
{
printf(" volt\n");
NaN = 0;
}
}
{//check ohms
if(x1.mass == ohm.mass && x1.length == ohm.length && x1.lum == ohm.lum && x1.time == ohm.time && x1.current == ohm.current && x1.temp == ohm.temp && x1.quan == ohm.quan)
{
printf(" ohm\n");
NaN = 0;
}
}
{//check watts
if(x1.mass == watt.mass && x1.length == watt.length && x1.lum == watt.lum && x1.time == watt.time && x1.current == watt.current && x1.temp == watt.temp && x1.quan == watt.quan)
{
printf(" watt\n");
NaN = 0;
}
}
{//check for joules
if(x1.mass == joule.mass && x1.length == joule.length && x1.lum == joule.lum && x1.time == joule.time && x1.current == joule.current && x1.temp == joule.temp && x1.quan == joule.quan)
{
printf(" joule\n");
NaN = 0;
}
}
{//check for farads
if(x1.mass == farad.mass && x1.length == farad.length && x1.lum == farad.lum && x1.time == farad.time && x1.current == farad.current && x1.temp == farad.temp && x1.quan == farad.quan)
{
printf(" farad\n");
NaN = 0;
}
}
{//check for henries
if(x1.mass == henry.mass && x1.length == henry.length && x1.lum == henry.lum && x1.time == henry.time && x1.current == henry.current && x1.temp == henry.temp && x1.quan == henry.quan)
{
printf(" henry\n");
NaN = 0;
}
}
{//check for hertz
if(x1.mass == hertz.mass && x1.length == hertz.length && x1.lum == hertz.lum && x1.time == hertz.time && x1.current == hertz.current && x1.temp == hertz.temp && x1.quan == hertz.quan)
{
printf(" hertz\n");
NaN = 0;
}
}
{//check for coulombs
if(x1.mass == coul.mass && x1.length == coul.length && x1.lum == coul.lum && x1.time == coul.time && x1.current == coul.current && x1.temp == coul.temp && x1.quan == coul.quan)
{
printf(" coul\n");
NaN = 0;
}
}
{//check for siemens
if(x1.mass == siem.mass && x1.length == siem.length && x1.lum == siem.lum && x1.time == siem.time && x1.current == siem.current && x1.temp == siem.temp && x1.quan == siem.quan)
{
printf(" siem\n");
NaN = 0;
}
}
{//check for newtons
if(x1.mass == newton.mass && x1.length == newton.length && x1.lum == newton.lum && x1.time == newton.time && x1.current == newton.current && x1.temp == newton.temp && x1.quan == newton.quan)
{
printf(" newton\n");
NaN = 0;
}
}
return NaN;
}
int Divide_by_zero (struct u_val x2)
{
int NaN;
if (x2.mag == 0)
NaN = 1;
else
NaN = 0;
return NaN;
}
//addition
struct u_val add_numbers (struct u_val x1, struct u_val x2)
{
struct u_val sum;
sum.mag = x1.mag + x2.mag;
sum.mass = x1.mass;
sum.length = x1.length;
sum.lum = x1.lum;
sum.time = x1.time;
sum.current = x1.current;
sum.temp = x1.temp;
sum.quan = x1.quan;
return sum;
}
//subtraction
struct u_val subtract_numbers (struct u_val x1, struct u_val x2)
{
struct u_val diff;
diff.mag = x1.mag - x2.mag;
diff.mass = x1.mass;
diff.length = x1.length;
diff.lum = x1.lum;
diff.time = x1.time;
diff.current = x1.current;
diff.temp = x1.temp;
diff.quan = x1.quan;
return diff;
}
//multiply the numbers and add units
struct u_val multiply_numbers (struct u_val x1,struct u_val x2)
{
struct u_val product;
product.mag = x1.mag * x2.mag;
product.mass = x1.mass + x2.mass;
product.length = x1.length + x2.length;
product.lum = x1.lum + x2.lum;
product.time = x1.time + x2.time;
product.current = x1.current + x2.current;
product.temp = x1.temp + x2.temp;
product.quan = x1.quan + x2.quan;
return product;
}
//divide numbers if number_2 is not 0 and subtract units
struct u_val divide_numbers (struct u_val x1, struct u_val x2)
{
struct u_val quotient;
quotient.mag = x1.mag / x2.mag;
quotient.mass = x1.mass - x2.mass;
quotient.length = x1.length - x2.length;
quotient.lum = x1.lum - x2.lum;
quotient.time = x1.time - x2.time;
quotient.current = x1.current - x2.current;
quotient.temp = x1.temp - x2.temp;
quotient.quan = x1.quan - x2.quan;
return quotient;
}
void print (struct u_val x1)
{
if(electrical_units(x1) == 1)
{
if(x1.mass !=0)
printf("kg^%.2f ", x1.mass);
if(x1.length !=0)
printf("m^%.2f ", x1.length);
if(x1.lum !=0)
printf("cd^%.2f ", x1.lum);
if(x1.time !=0)
printf("s^%.2f ", x1.time);
if(x1.current !=0)
printf("A^%.2f ", x1.current);
if(x1.temp !=0)
printf("K^%.2f ", x1.temp);
if(x1.quan !=0)
printf("mol^%.2f ", x1.quan);
}
}
int main (void)
{
struct u_val x1, x2, sum, diff, product, quotient;
int NaN;
printf("Let's get information about your first value!\n");
x1 = Get_u ();
printf("Let's get information about your second value!\n");
x2 = Get_u ();
NaN = Check_units (x1, x2);
sum = add_numbers (x1, x2);
//check for units being equal
if(NaN == 0)
{
printf("Addition yields: %f",sum.mag);
print (sum);
diff = subtract_numbers (x1, x2);
printf("\nSubtraction yields: %f",diff.mag);
print (diff);
}
if(Check_units (x1, x2) == 1)
{//compute when units arent equal
printf("Can't add; units are not equal!\nCan't subtract; units are not equal!");
}
//no need to run tests for multiplication
product = multiply_numbers (x1, x2);
printf("\nMultiplication yields: %f",product.mag);
print (product);
quotient = divide_numbers (x1, x2);
if (Divide_by_zero (x2) == 0)
{//if 2nd number has a magnitude that is not 0 compute the amount and print with units
printf("\nDivision yields: %f ",quotient.mag);
print (quotient);
}
else
{//when the 2nd number is 0 you can't divide
printf("\nCan't divide by 0!");
}
getchar();
getchar();
return 0;
}
