rs232/485 communication

hi,
i'm going to develop one application to communicate rs232 or by using c++ or c# language.
can u give me a snippet code or url for it?
any suggestion will be welcome!!!
regrads
so

Ok, so to start with, there is no STANDARD way to communicate on a serial port in C. It is all depending on the OS and hardware you have to work with. So if you tell us what OS and hardware you have, we MAY be able to help you (but of course, it is also possible that we can't, if the hardware or OS is really unusual).

--
Mats

Go with C#, can't be any easier:

Code:

---

using(var Port = new System.IO.Ports.SerialPort("COM1", 9600, System.IO.Ports.Parity.None, 8, System.IO.Ports.StopBits.One))
{
        Port.Open();
        Port.Write("Hello");
}

---

Quote:

---

Originally Posted by Magos

Go with C#, can't be any easier:

---

Yes, and it's not NECESSARILY much harder in C++ or C. You may need two or three lines to open the port, then you just write to and read from the port - in some OS's. Presumably C# isn't really viable for real-time OS systems that do not support files and such things, so in that case, it's more C or C++ only.

Obviously, in any language, it gets more complex if we have to deal with transmission errors, time-outs due to other end dropping out, etc, etc, which is usually necessary for REAL systems.

But giving examples of how it's done in one or another environment is pointless if the environment that the original poster is asking about is one that is not at all similar - and it doesn't matter if we give a simple or complex example.

--
Mats

the previous principal software engineer at my company picked these out:

http://marshallsoft.com/

i've used them for years. their documentation could be a lot better, but i've never had any real problems with it.

I quite like this site - http://www.lvr.com/serport.htm

i appreciate your help.
and thx, Magos.
but i want to get some code about 485 communicate.
can u help me?
regards
so

Quote:

---

Originally Posted by Magos

Go with C#, can't be any easier:

Code:

---

using(var Port = new System.IO.Ports.SerialPort("COM1", 9600, System.IO.Ports.Parity.None, 8, System.IO.Ports.StopBits.One))
{
    Port.Open();
    Port.Write("Hello");
}

---

---

Go with C/C++ its even easier than that

Code:

---

FILE* pFile = fopen("COM1:" , "w+b");
fprintf("Hello World\n",pFile);

---

For more detailed control see http://msdn.microsoft.com/en-us/library/ms810467.aspx

Quote:

---

Originally Posted by sgh

i appreciate your help.
and thx, Magos.
but i want to get some code about 485 communicate.
can u help me?
regards
so

---

RS-485? Never used that, but should be the same like RS-232 from what I heard.
Could you be more specific in what you're trying to achieve?

Quote:

---

Originally Posted by Magos

RS-485? Never used that, but should be the same like RS-232 from what I heard.

---

From a software point of view there is none, but note that RS-485 does not require a particular protocol, so your software would have to impliment any protocol already in use on the system.

thank u for your help.
i need one more thing.
it's usb communication.
i bought one device(fingerprint) and i want to develop program to use this one using rs232/485 or usb.
i finished already developing program via rs232 communicating.
and i'd like to communicate via usb bus.
how can i do it?
best regards.
p.s.
my english is no so good.
thx

USB communication is much harder. Unlike RS232 it's not a port but a bus.
You have to google some info.

you should also make sure you back up your files before embarking on a usb driver.

the equipment i use that uses a USB connection is VERY finnicky.

for example, providing the wrong ADC code would cause the whole OS to lock up on one device.

on another, closing an invalid device handle gave me 'the blue screen of death' :|

of course, these are problems with the OEM's code and not with USB, but you should be very careful.