In the intall notes it says:
Code:
./configure
make
make test (optional)
make install (as root)
------------------------------------------------------------------------
In the install-sh
Code:
#!/bin/sh
#
# install - install a program, script, or datafile
# This comes from X11R5 (mit/util/scripts/install.sh).
#
# Copyright 1991 by the Massachusetts Institute of Technology
#
# Permission to use, copy, modify, distribute, and sell this software and its
# documentation for any purpose is hereby granted without fee, provided that
# the above copyright notice appear in all copies and that both that
# copyright notice and this permission notice appear in supporting
# documentation, and that the name of M.I.T. not be used in advertising or
# publicity pertaining to distribution of the software without specific,
# written prior permission. M.I.T. makes no representations about the
# suitability of this software for any purpose. It is provided "as is"
# without express or implied warranty.
#
# Calling this script install-sh is preferred over install.sh, to prevent
# `make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
# from scratch. It can only install one file at a time, a restriction
# shared with many OS's install programs.
# set DOITPROG to echo to test this script
# Don't use :- since 4.3BSD and earlier shells don't like it.
doit="${DOITPROG-}"
# put in absolute paths if you don't have them in your path; or use env. vars.
mvprog="${MVPROG-mv}"
cpprog="${CPPROG-cp}"
chmodprog="${CHMODPROG-chmod}"
chownprog="${CHOWNPROG-chown}"
chgrpprog="${CHGRPPROG-chgrp}"
stripprog="${STRIPPROG-strip}"
rmprog="${RMPROG-rm}"
mkdirprog="${MKDIRPROG-mkdir}"
transformbasename=""
transform_arg=""
instcmd="$mvprog"
chmodcmd="$chmodprog 0755"
chowncmd=""
chgrpcmd=""
stripcmd=""
rmcmd="$rmprog -f"
mvcmd="$mvprog"
src=""
dst=""
dir_arg=""
while [ x"$1" != x ]; do
case $1 in
-c) instcmd="$cpprog"
shift
continue;;
-d) dir_arg=true
shift
continue;;
-m) chmodcmd="$chmodprog $2"
shift
shift
continue;;
-o) chowncmd="$chownprog $2"
shift
shift
continue;;
-g) chgrpcmd="$chgrpprog $2"
shift
shift
continue;;
-s) stripcmd="$stripprog"
shift
continue;;
-t=*) transformarg=`echo $1 | sed 's/-t=//'`
shift
continue;;
-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
shift
continue;;
*) if [ x"$src" = x ]
then
src=$1
else
# this colon is to work around a 386BSD /bin/sh bug
:
dst=$1
fi
shift
continue;;
esac
done
if [ x"$src" = x ]
then
echo "install: no input file specified"
exit 1
else
true
fi
if [ x"$dir_arg" != x ]; then
dst=$src
src=""
if [ -d $dst ]; then
instcmd=:
chmodcmd=""
else
instcmd=mkdir
fi
else
# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
# might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'.
if [ -f $src -o -d $src ]
then
true
else
echo "install: $src does not exist"
exit 1
fi
if [ x"$dst" = x ]
then
echo "install: no destination specified"
exit 1
else
true
fi
# If destination is a directory, append the input filename; if your system
# does not like double slashes in filenames, you may need to add some logic
if [ -d $dst ]
then
dst="$dst"/`basename $src`
else
true
fi
fi
## this sed command emulates the dirname command
dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
# Make sure that the destination directory exists.
# this part is taken from Noah Friedman's mkinstalldirs script
# Skip lots of stat calls in the usual case.
if [ ! -d "$dstdir" ]; then
defaultIFS='
'
IFS="${IFS-${defaultIFS}}"
oIFS="${IFS}"
# Some sh's can't handle IFS=/ for some reason.
IFS='%'
set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
IFS="${oIFS}"
pathcomp=''
while [ $# -ne 0 ] ; do
pathcomp="${pathcomp}${1}"
shift
if [ ! -d "${pathcomp}" ] ;
then
$mkdirprog "${pathcomp}"
else
true
fi
pathcomp="${pathcomp}/"
done
fi
if [ x"$dir_arg" != x ]
then
$doit $instcmd $dst &&
if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
else
# If we're going to rename the final executable, determine the name now.
if [ x"$transformarg" = x ]
then
dstfile=`basename $dst`
else
dstfile=`basename $dst $transformbasename |
sed $transformarg`$transformbasename
fi
# don't allow the sed command to completely eliminate the filename
if [ x"$dstfile" = x ]
then
dstfile=`basename $dst`
else
true
fi
# Make a temp file name in the proper directory.
dsttmp=$dstdir/#inst.$$#
# Move or copy the file name to the temp name
$doit $instcmd $src $dsttmp &&
trap "rm -f ${dsttmp}" 0 &&
# and set any options; do chmod last to preserve setuid bits
# If any of these fail, we abort the whole thing. If we want to
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $instcmd $src $dsttmp" command.
if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
# Now rename the file to the real destination.
$doit $rmcmd -f $dstdir/$dstfile &&
$doit $mvcmd $dsttmp $dstdir/$dstfile
fi &&
exit 0
---------------------------------------------------------------------------------------------
Makefile.in
Code:
# Makefile prototype for configure
# Copyright 2004 Phil Karn, KA9Q
# May be used under the terms of the GNU Lesser General Public License (LGPL)
# @configure_input@
srcdir = @srcdir@
prefix = @prefix@
exec_prefix=@exec_prefix@
VPATH = @srcdir@
CC=@CC@
LIBS=@MLIBS@ fec.o sim.o viterbi27.o viterbi27_port.o viterbi29.o viterbi29_port.o \
viterbi39.o viterbi39_port.o \
viterbi615.o viterbi615_port.o encode_rs_char.o encode_rs_int.o encode_rs_8.o \
decode_rs_char.o decode_rs_int.o decode_rs_8.o \
init_rs_char.o init_rs_int.o ccsds_tab.o \
encode_rs_ccsds.o decode_rs_ccsds.o ccsds_tal.o \
dotprod.o dotprod_port.o \
peakval.o peakval_port.o \
sumsq.o sumsq_port.o
CFLAGS=@CFLAGS@ -I. -Wall @ARCH_OPTION@
SHARED_LIB=@SH_LIB@
all: libfec.a $(SHARED_LIB)
test: vtest27 vtest29 vtest39 vtest615 rstest dtest sumsq_test peaktest
@echo "Correctness tests:"
./vtest27 -e 3.0 -n 1000 -v
./vtest29 -e 2.5 -n 1000 -v
./vtest39 -e 2.5 -n 1000 -v
./vtest615 -e 1.0 -n 100 -v
./rstest
./dtest
./sumsq_test
./peaktest
@echo "Speed tests:"
./vtest27
./vtest29
./vtest39
./vtest615
install: all
mkdir -p @libdir@
install -m 644 -p $(SHARED_LIB) libfec.a @libdir@
# (cd @libdir@;ln -f -s $(SHARED_LIB) libfec.so)
@REBIND@
mkdir -p @includedir@
install -m 644 -p fec.h @includedir@
mkdir -m 0755 -p @mandir@/man3
install -m 644 -p simd-viterbi.3 rs.3 dsp.3 @mandir@/man3
peaktest: peaktest.o libfec.a
gcc -g -o $@ $^
sumsq_test: sumsq_test.o libfec.a
gcc -g -o $@ $^
dtest: dtest.o libfec.a
gcc -g -o $@ $^ -lm
vtest27: vtest27.o libfec.a
gcc -g -o $@ $^ -lm
vtest29: vtest29.o libfec.a
gcc -g -o $@ $^ -lm
vtest39: vtest39.o libfec.a
gcc -g -o $@ $^ -lm
vtest615: vtest615.o libfec.a
gcc -g -o $@ $^ -lm
rstest: rstest.o libfec.a
gcc -g -o $@ $^
rs_speedtest: rs_speedtest.o libfec.a
gcc -g -o $@ $^
# for some reason, the test programs without args segfault on the PPC with -O2 optimization. Dunno why - compiler bug?
vtest27.o: vtest27.c fec.h
gcc -g -c $<
vtest29.o: vtest29.c fec.h
gcc -g -c $<
vtest39.o: vtest39.c fec.h
gcc -g -c $<
vtest615.o: vtest615.c fec.h
gcc -g -c $<
libfec.a: $(LIBS)
ar rv $@ $^
ranlib libfec.a
# for Darwin
libfec.dylib: $(LIBS)
$(CC) -dynamiclib -install_name $@ -o $@ $^
# for Linux et al
libfec.so: $(LIBS)
gcc -shared -Xlinker -soname=$@ -o $@ -Wl,-whole-archive $^ -Wl,-no-whole-archive -lc
dotprod.o: dotprod.c fec.h
dotprod_port.o: dotprod_port.c fec.h
viterbi27.o: viterbi27.c fec.h
viterbi27_port.o: viterbi27_port.c fec.h
viterbi29.o: viterbi29.c fec.h
viterbi39.o: viterbi39.c fec.h
viterbi39_port.o: viterbi39_port.c fec.h
viterbi39_sse2.o: viterbi39_sse2.c fec.h
viterbi39_sse.o: viterbi39_sse.c fec.h
viterbi39_mmx.o: viterbi39_mmx.c fec.h
encode_rs_char.o: encode_rs_char.c char.h rs-common.h
encode_rs_int.o: encode_rs_int.c int.h rs-common.h
encode_rs_8.o: encode_rs_8.c fixed.h
encode_rs_av.o: encode_rs_av.c fixed.h
decode_rs_char.o: decode_rs_char.c char.h rs-common.h
decode_rs_int.o: decode_rs_int.c int.h rs-common.h
decode_rs_8.o: decode_rs_8.c fixed.h
init_rs_char.o: init_rs_char.c char.h rs-common.h
init_rs_int.o: init_rs_int.c int.h rs-common.h
ccsds_tab.o: ccsds_tab.c
ccsds_tab.c: gen_ccsds
./gen_ccsds > ccsds_tab.c
gen_ccsds: gen_ccsds.o init_rs_char.o
gcc -o $@ $^
gen_ccsds.o: gen_ccsds.c
gcc $(CFLAGS) -c -o $@ $<
ccsds_tal.o: ccsds_tal.c
ccsds_tal.c: gen_ccsds_tal
./gen_ccsds_tal > ccsds_tal.c
exercise_char.o: exercise.c
gcc $(CFLAGS) -c -o $@ $<
exercise_int.o: exercise.c
gcc -DBIGSYM=1 $(CFLAGS) -c -o $@ $<
exercise_8.o: exercise.c
gcc -DFIXED=1 $(CFLAGS) -c -o $@ $<
exercise_ccsds.o: exercise.c
gcc -DCCSDS=1 $(CFLAGS) -c -o $@ $<
viterbi27.o: viterbi27.c fec.h
viterbi27_port.o: viterbi27_port.c fec.h
viterbi27_av.o: viterbi27_av.c fec.h
viterbi27_mmx.o: viterbi27_mmx.c fec.h
gcc $(CFLAGS) -mmmx -c -o $@ $<
viterbi27_sse.o: viterbi27_sse.c fec.h
gcc $(CFLAGS) -msse -c -o $@ $<
viterbi27_sse2.o: viterbi27_sse2.c fec.h
gcc $(CFLAGS) -msse2 -c -o $@ $<
viterbi29.o: viterbi29.c fec.h
viterbi29_port.o: viterbi29_port.c fec.h
viterbi29_av.o: viterbi29_av.c fec.h
viterbi29_mmx.o: viterbi29_mmx.c fec.h
gcc $(CFLAGS) -mmmx -c -o $@ $<
viterbi29_sse.o: viterbi29_sse.c fec.h
gcc $(CFLAGS) -msse -c -o $@ $<
viterbi29_sse2.o: viterbi29_sse2.c fec.h
gcc $(CFLAGS) -msse2 -c -o $@ $<
viterbi39.o: viterbi39.c fec.h
viterbi39_port.o: viterbi39_port.c fec.h
viterbi39_av.o: viterbi39_av.c fec.h
viterbi39_mmx.o: viterbi39_mmx.c fec.h
gcc $(CFLAGS) -mmmx -c -o $@ $<
viterbi39_sse.o: viterbi39_sse.c fec.h
gcc $(CFLAGS) -msse -c -o $@ $<
viterbi39_sse2.o: viterbi39_sse2.c fec.h
gcc $(CFLAGS) -msse2 -c -o $@ $<
viterbi615.o: viterbi615.c fec.h
viterbi615_port.o: viterbi615_port.c fec.h
viterbi615_av.o: viterbi615_av.c fec.h
viterbi615_mmx.o: viterbi615_mmx.c fec.h
gcc $(CFLAGS) -mmmx -c -o $@ $<
viterbi615_sse.o: viterbi615_sse.c fec.h
gcc $(CFLAGS) -msse -c -o $@ $<
viterbi615_sse2.o: viterbi615_sse2.c fec.h
gcc $(CFLAGS) -msse2 -c -o $@ $<
cpu_mode_x86.o: cpu_mode_x86.c fec.h
cpu_mode_ppc.o: cpu_mode_ppc.c fec.h
clean:
rm -f *.o $(SHARED_LIB) *.a rs_speedtest peaktest sumsq_test dtest vtest27 vtest29 vtest39 vtest615 rstest ccsds_tab.c ccsds_tal.c gen_ccsds gen_ccsds_tal core
rm -rf autom4te.cache
distclean: clean
rm -f config.log config.cache config.status config.h makefile
--------------------------------------------------------------------------
I don't extract of them what I must do... :S