Modem in Linux need help fast please!

This is a discussion on Modem in Linux need help fast please! within the Tech Board forums, part of the Community Boards category; I need help here. in Windows my modem is 3Com/US Robotis. I need help how to set my modem up ...

  1. #1
    Registered User xxxrugby's Avatar
    Join Date
    Jan 2005
    Posts
    178

    Modem in Linux need help fast please!

    I need help here. in Windows my modem is 3Com/US Robotis.

    I need help how to set my modem up on linux Fedora Core 3?
    Answering for complete newbie!

    I really need this fast. Thanks!


    with scanModem

    Code:
    
     DO use the following line as the email Subject Line, to alert cogent experts:
          scanModem, Fedora Core
    Kernel \r kernel 2.6.9-1.667
     Occassionally reponses are blocked by an Internet Providers mail filters.
     So do in a day also check the Archived responses at DISCUSS@linmodems.org
    Code updated on:  2005_March_27
    ------------ --------------  System information ------------------------
    Fedora Core release 3 (Heidelberg)
    Kernel 
     on System with processor: i686
     currently under kernel:   2.6.9-1.667
    
     The kernel-2.6.9-1.667 was compiled with CONFIG_REGPARM, providing more compact and faster code.
    
     The kernel was assembled with compiler:  3.4.2
     with current System compiler GCC=3.4.2
    
    Checking for kernel-headers needed for compiling.
     kernel-headers have base folder /lib/modules/2.6.9-1.667/build
    
     A /dev/modem symbolic link is not set.
     Checking for USB modems
     None found
    
    Modem candidates are at PCI_buses:  00:0d.0
        
    Providing detail for device at PCI_bus 00:0d.0
      with vendor-ID:device-ID
    	    ----:----
    Class 0780: 12b9:1007   Communication controller: 5610 56K FaxModem USR 56k Internal WinModem
      SubSystem 12b9:00b2   5610 56K FaxModem: Unknown device 00b2
    	Flags: medium devsel, IRQ 11
    	Memory at 42200000 (32-bit, prefetchable) [size=64]
    	Memory at 42000000 (32-bit, prefetchable) [size=64K]
      
                      -----PCI_IDs-------                    --CompilerVer- 
        Feature List:  Primary  Subsystem Distr  KernelVer   kernel default  CPU
     ./scanModem test 12b9:1007 12b9:00b2 redhat 2.6.9-1.667 3.4.2 3.4.2    i686
    
          
     Information on several modem chipset providers is provided below,
     because ambiguities remain on the correct choice of supporting software.
                
     == Checking PCI IDs through modem chip suppliers ==
    
     10b7 is 3COM
           :1006    0038TA <- AC101 - TF Mini-PCI 56K V.90 WinModem  no Linux support
           :1007    3C556 V.90 Mini-PCI 	WinModem  no Linux support
     12b9 is US Robotics. acquired by 3COM
           :0062    erk41926a-0.6 usr 56k internal modem
           ;1006    3cp803598  Voice          WinModem  no Linux support
           :1007    ERL3263A-0 DF GWPCI PC99  WinModem  no Linux support
           :1008    3cp803598  is Supported by the standard:  serial.o
     The following may be supported  by Conexant drivers at   http://www.linuxant.com
       14f1:2f12 (3COM/USR model 3094-3095)
       14f1:2f13 (USR OEM)
       14f1:2f14 3COM/USR
     though they carry USR labels.
    
    
      ======= PCI_ID checking completed ====== 
     Update=2005_March_27
    A PCMCIA CardBus is not detected on this System.
       
    For information on modem port creation under the UDEV device file system see:
       http://linmodems.technion.ac.il/archive-fourth/msg03299.html  for Conexnant modems
       http://linmodems.technion.ac.il/archive-fifth/msg01178.html  for Lucent/Agere DSP modems
       
    The following information blocks just query some ppp support items.
    
    ====================================================
       grep -rs ppp /etc/modprobe.*
    -------------------------------------
    /etc/modprobe.conf.dist:alias tty-ldisc-3 ppp_async
    /etc/modprobe.conf.dist:alias tty-ldisc-14 ppp_synctty
    /etc/modprobe.conf.dist:alias ppp-compress-18 ppp_mppe
    /etc/modprobe.conf.dist:install ppp-compress-21 /bin/true
    /etc/modprobe.conf.dist:alias ppp-compress-24 ppp_deflate
    /etc/modprobe.conf.dist:alias ppp-compress-26 ppp_deflate
    -------------------------------------
     PPP support module  bsd_comp.ko  not found!
     Resident PPP support modules are properly uncompressed .
     COMM services are not active
    DEVPPP=crw------- 1 root root 108, 0 OĹľu 30 2005 /dev/ppp
    A /dev/modem symbolic link is not present
    
     No devfsd.conf file found, indicated absense of the devfsd daemon package
     for device file system (devfs) symbolic link support.
    
    DEVFSD=
     ---- dmesg queries -------
    ACPI: BIOS age (1999) fails cutoff (2001), acpi=force is required to enable ACPI
    ACPI: Interpreter disabled.
    apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    audit: initializing netlink socket (disabled)
    
      Beginning with Fedora 2  kernel-2.6.6-1.427, kernel-headers needed 
      for compiling drivers are provide at: /lib/modules/kernel-version/build/
      Thus upgrading above kernel 2.6.5-1.358 to 2.6.6-* is Stongly Recommended
      
      pppd version 2.4.2 may not be fully compatible with 2.6.8 kernel releases.
      If an initial CONNECT is achieved without PPP being subsequently established,
      drop back to a 2.4.1 version.  This has worked for PCTEL AMR modem users,
      supported by the http://www.smlink.com  slmodem software.
      Check pppd version with:
        pppd --version
      See  http://linmodems.technion.ac.il/archive-fourth/msg03167.html
        
      
     For kernel-version 2.4.20-8 , a failure in utomatic loading of PPP related modules 
     has been reported. It was necessary to manually load with:
      /sbin/modprobe /lib/modules/2.4.20-8/kernel/drivers/net ppp_generic 
      /sbin/modprobe /lib/modules/2.4.20-8/kernel/drivers/net ppp_deflate 
      /sbin/modprobe /lib/modules/2.4.20-8/kernel/drivers/net ppp_synctty 
      /sbin/modprobe /lib/modules/2.4.20-8/kernel/drivers/net ppp_async 
     or dialout efforts failed.
      
      The Internet Configuration Wizard writes a configuration file:
        /etc/wvdial.conf
      containing a line default line
        Stupid Mode = yes
      Better dialup performance may be achieved by commenting out this line as:
        # Stupid Mode = yes
      Also non-USA Users may need to add to the [Modem0] block:
        Init2 = AT+GCI=hexadecimal_country_code
      but test without it first.
    
      redhat is not yet providing pre-compiled drivers for WinModems


    # /sbin/lspci

    Code:
    00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 02)
    00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 02)
    00:0d.0 Communication controller: 5610 56K FaxModem USR 56k Internal WinModem
    00:14.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
    00:14.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
    00:14.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
    00:14.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
    01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro AGP 1X (rev 5c)
    cat /proc/pci -> naredba mi baca

    Code:
    PCI devices found:
    Bus 0, device 0, function 0:
    Class 0600: PCI device 8086:7190 (rev 2).
    Master Capable. Latency=64.
    Prefetchable 32 bit memory at 0x44000000 [0x47ffffff].
    Bus 0, device 1, function 0:
    Class 0604: PCI device 8086:7191 (rev 2).
    Master Capable. Latency=64. Min Gnt=140.
    Bus 0, device 13, function 0:
    Class 0780: PCI device 12b9:1007 (rev 0).
    IRQ 11.
    Prefetchable 32 bit memory at 0x42200000 [0x4220003f].
    Prefetchable 32 bit memory at 0x42000000 [0x4200ffff].
    Prefetchable 32 bit memory at 0x42100000 [0x42107fff].
    I/O at 0x2040 [0x207f].
    Bus 0, device 20, function 0:
    Class 0601: PCI device 8086:7110 (rev 2).
    Bus 0, device 20, function 1:
    Class 0101: PCI device 8086:7111 (rev 1).
    Master Capable. Latency=64.
    I/O at 0x2020 [0x202f].
    Bus 0, device 20, function 2:
    Class 0c03: PCI device 8086:7112 (rev 1).
    IRQ 11.
    Master Capable. Latency=64.
    I/O at 0x2000 [0x201f].
    Bus 0, device 20, function 3:
    Class 0680: PCI device 8086:7113 (rev 2).
    IRQ 9.
    Bus 1, device 0, function 0:
    Class 0300: PCI device 1002:4744 (rev 92).
    IRQ 11.
    Master Capable. Latency=66. Min Gnt=8.
    Prefetchable 32 bit memory at 0x41000000 [0x41ffffff].
    I/O at 0x1000 [0x10ff].
    Non-prefetchable 32 bit memory at 0x40000000 [0x40000fff]
    Last edited by xxxrugby; 03-30-2005 at 03:28 PM.
    Sorry for spelling errors, not English!
    xxxrugby: "All Human Race Will Die From My Hand!"
    xxxrugby: "We are all philosophers, when question is about politics!"

Popular pages Recent additions subscribe to a feed

Similar Threads

  1. Some common Linux Questions???
    By code2d in forum Tech Board
    Replies: 4
    Last Post: 12-28-2006, 01:17 AM
  2. Linux Linux why Linux??
    By afreedboy in forum Tech Board
    Replies: 146
    Last Post: 01-21-2004, 05:27 PM
  3. Modem problem w/ RedHat Linux 9
    By Machewy in forum Tech Board
    Replies: 10
    Last Post: 01-05-2004, 05:58 PM
  4. Linux? Windows Xp?
    By VooDoo in forum Linux Programming
    Replies: 15
    Last Post: 07-31-2002, 08:18 AM
  5. linux vs linux?
    By Dreamerv3 in forum Linux Programming
    Replies: 5
    Last Post: 01-22-2002, 08:39 AM

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21