Identifying pattern in ADC for PIC16F684

Hi,

I would really appreciate any help with this programming, I am a beginner programmer and am really struggling to get anywhere with this.

I have a ADC input that I want to compare to an oscillating pattern like a sine wave and identify when the ADC input matches this known curve pattern. I have a microphone input to the PIC and I essentially want to determine when a siren is heard, which produces this sine wave at the ADC, and when it isnt.

I have thought that one way of achieving this is to store a number of ADC readings to an array and then compare this to an array of the values along the sine wave.

I have this programming so far but I'm not sure how to copy a number of ADC readings to an array.

Code:

---

//uController used: 16F684.
//This program uses the internal osc, set to 4 Mhz by default.
//A 10K POT is connected to AN2- the analogue input.
//The first 2 bit of the converted result is not used. We only use AHRESH to store bit 2 to 9. 

#include <pic.h>
#include "delay.c"
#include "delay.h"
 
__CONFIG(WDTDIS & INTIO & PWRTEN & MCLRDIS & UNPROTECT & BORDIS);
                                                                                                                main()

{
  int ADCresult= 0;

CMCON0 = 7;                      //Turn off comparators
ANSEL = 0b00000100;          //Pin 11- RA2/AN2 as analogue input.
TRISA= 0b00000100;            //PortA as output except RA2 as input
TRISC = 0;                          //PortC as output
ADCON0= 0b00001001;          //Result left justified format, voltage reference= VDD,
                                        //AN2= analogue input, initiates ADC
ADCON1= 0b00010000;      //For 4 Mhz, 8Tosc= 2 uS, which > 1.6 uS, the minimum
 
  while(1)
  {
    DelayUs(50);                  //Wait minimum sample time.
    GODONE = 1;                  //Start conversion.
    while(GODONE== 1);        //Wait until conversion is done.
    ADCresult= ADRESH;        //Transfer from ADRESH to ADCresult.
   
}
}

---

Thanks for any help or suggestions
C.Fry

Congrats on the use of CODE tags. Your whitespace/indentation needs work (edit the post)

Now, to your code question...

Make some functions to clean up main()
a) InitADC() to initialize the ADC and other things
b) ReadADC() and have its return value be the reading
c) in main() then call InitADC once and then ReadADC over and over in a loop, each time taking the reading and copying it into an array you've declared as int Readings[MAX_NUM_READING];

Making a loop like above, at some point you are going to run out of array space. You need to handle that.

However, you have some fundamental issues if I understand what it is you are trying to do.
Let me see if I have it correct: You have a look-up table to which you are going to compare the array of inbound ADC readings taken essentially from a microphone?